CPUsGamingMemory and Storage

Single-Channel vs Dual-Channel RAM: Which One is Better

Single-channel vs dual-channel RAM: which memory setup is better for gaming and high-performance PCs? But, before we look into that, what’s the difference between a single-channel and dual-channel memory config. And how much performance do you gain on switching to a dual-channel memory setup?

Games like Assassins’ Creed and Fallout 4 benefit immensely from dual-channel memory configurations and it’s impossible to get a smooth experience if you’re running a single-channel memory setup, regardless of how expensive the rest of your rig may be. In other games, the performance difference between single-channel and dual-channel RAM can vary from subtle to unnoticeable.

Impact of Memory Speed on Gaming Performance

RAM speed, in terms of frequency, can also have an impact on your gaming experience. The higher the frequency, the greater the memory bandwidth. With DDR4, 3200 MHz is the ideal target. A small lifehack: pick up low-clocked RAM from big-name manufacturers like Samsung. There’s a very high chance that you’ll be able to crank the clock speeds up on the modules.

I used to have 4 RAM modules–a pair of ADATAs at 2400 MHz stock and a Samsung module at 2100 MHz. All four ran happily at 2933 MHz. High-frequency RAM is especially important if you have integrated graphics: your iGPU shares memory with the CPU and you’ll need as much memory bandwidth as you can get.

Single-Channel vs Dual-Channel Memory

But there’s a third concern that is often overlooked. And it has a far larger impact on memory bandwidth than overclocking your RAM modules. We’re talking about going dual-channel. What is a dual-channel memory config and what’s the difference between dual and single-channel configurations?

RAM communicates with the CPU through the memory controller on the CPU. Most modern motherboards have two 64-bit (total 128-bit) channels between the CPU and memory. In a single-channel configuration, only one of them is functional. This limits memory throughput to the rated speed of the slowest single RAM module installed.

In dual-channel memory configurations, the memory controller uses both the channels to communicate with the CPU, essentially doubling the bandwidth. But what about multi-channel configurations? Technically, quad-channel systems exist, but they’re mainly found on server-centric and exotic boards. For most people, multi-channel means dual-channel memory.

Dual-Channel Doubles Memory Throughput

Single-channel 2133 MHz DDR4 delivers 17 GB/s of memory bandwidth. If you have a pair of 2133 MHz DDR4 modules in dual-channel, your memory bandwidth doubles to 34 GB/s. The only way to hit that level of performance in single-channel mode is to use memory modules running at 4000 MHz or higher.

Courtesy: GamersNexus

We have to stress an important point here: you need RAM modules in multiples of two in order to utilize dual-channel. Most budget to midrange boards will either have two or four memory slots. I have a Gigabyte B450 DS3H with 4 memory slots and dual-channel support. If you have two slots and your motherboard supports dual-channel, setting it up is often as easy as just inserting a second memory module and booting up.

Courtesy: GamersNexus

If you have 4 slots, however, things are a bit more complicated. Your motherboard manual will tell you which slots to insert your RAM modules if you want to enable dual-channel. Or, you could just get 4 RAM modules and have it run by default. This can be confusing because there’s usually no “on switch” for dual-channel memory. As the Hardware Times motto goes, “it just works.” Well, at least when it does work.

If you’re not sure about whether or not dual-channel is enabled, download CPU-Z, then click on the memory tab. It’ll mention whether you’re running your memory in a dual or single-channel configuration.

Single-Channel vs Dual-Channel RAM: Gaming Performance with the AMD Ryzen 7 3700X

What’s the performance difference between single-channel and dual-channel memory? It varies from game to game, but several titles show a significant increase in your minimum and average framerates with a dual-channel configuration. The Assassin’s Creed series and Fallout 4 are notable examples. As already mentioned, Assassin’s Creed Origins and Assassin’s Creed Odyssey are nearly unplayable on PC without a dual-channel memory config.

Single-Channel RAM

At first sight, the difference may not look like much. After all, the average frame rates aren’t affected by much, but the lows and frame pacing take a big hit. The CPU latency in single-channel increases by a whopping 50%. This because there is only one 64-bit channel between the CPU and memory (in dual-channel, there are two)

Dual-Channel RAM

Other games like The Division 2 and Shadow of the Tomb Raider have an ever lesser impact on average frame rates but the lows and consistency are affected drastically.

Single-Channel RAM

In single-channel mode, the frame rate drops below 60 quite often in Division 2 but in dual-channel, it stays over 60 throughout the duration of the benchmark. The FPS drops are fewer and the 1% lows are particularly higher. This directly translates into smoother gameplay and fewer bouts of anger.

Dual-Channel RAM

Impact of Dual-Channel Memory on Gaming Performance: AMD Ryzen 9 3900X

Let’s do a more detailed test, this time with the 12-core Ryzen 9 3900X. Unlike the Ryzen 7, the 3900X has two CCDs, connected by the Infinity Fabric. As such, the impact of memory speeds and dual-channel memory should be more prominent in this case. We’ll be testing Assassins’ Creed Origins, Ashes Escalation, The Division 2, and Metro Exodus at the highest quality preset at 1080p (paired with the GeForce RTX 2080 Super):

As expected, Assassins’ Creed chokes really hard when using a 2400MHz, single-channel configuration. Even the mighty 3900X can’t hit an average of 60 FPS (with an RTX 2080 Ti) at 1080p in Origins, with lows of just 20. Switching to a dual-channel config, more than doubles the lows and pushes the average to over 80 FPS. It’s interesting to note that a dual-channel 2400MHz kit is better than a single channel 3600MHz config.

Ashes Escalation shows similar results. The game is unplayable with a slower single channel config, but switching to a faster memory module or a cheap dual-channel kit does the job. Once again, a cheaper dual-channel config is better than a pricey single-channel 3600MHz module.

The Division 2 and Metro Exodus behave a bit differently. Both the games perform better using the 3600MHz single-channel memory config compared to 2400MHz dual. Regardless, the difference between 3600MHz single-channel and 2400 MHz double-channel memory is marginal at best. This further proves that it’s better to opt for a 3200MHz dual-channel config over a much more expensive 3600MHz single-channel module.

At the end of the day, it’s about the overall bandwidth, and the former delivers more data to the CPU, all the while keeping your budget reasonable. Going dual-channel is one of the simplest, most obvious upgrades you can make. You already have (at least) a single RAM module. You can double your memory bandwidth for the price of just one more, and increase your framerate in some games by as much as you would when getting a new GPU.

And if you’re gaming on integrated graphics–such as on a Ryzen APU–dual-channel memory can increase your average framerate in most games by 10-30 percent, or even more. It’s inexpensive, easy to set up, and delivers a notable boost to performance. Go dual channel. Just do it.


Computer Engineering dropout (3 years), writer, journalist, and amateur poet. I started my first technology blog, Techquila while in college to address my hardware passion. Although largely successful, it was a classic example of too many people trying out multiple different things but getting nothing done. Left in late 2019 and been working on Hardware Times ever since.
Back to top button